Apex to R6 Siege Sens
Multiply your Apex sensitivity by 3.8397 to get R6 Siege — same DPI, same cm/360, same aim.
Your R6 Siege sensitivity
Exact value is 5.76. Siege only takes whole numbers, so for a perfect match also set MouseSensitivityMultiplierUnit=0.019199 in GameSettings.ini (Documents → My Games → Rainbow Six - Siege → your profile folder).
- cm / 360°
- 34.64
- inches / 360°
- 13.64
- Apex eDPI
- 1200
- Multiplier
- × 3.8397
Assumes the default MouseSensitivityMultiplierUnit of 0.02 in GameSettings.ini — most players never change it.
Apex to R6 Siege conversion table
| Apex sens | R6 Siege sens | cm/360 at 800 DPI | cm/360 at 1600 DPI |
|---|---|---|---|
| 1 | 4(exact 3.84) | 52.0 | 26.0 |
| 1.2 | 5(exact 4.61) | 43.3 | 21.6 |
| 1.5 | 6(exact 5.76) | 34.6 | 17.3 |
| 2 | 8(exact 7.68) | 26.0 | 13.0 |
| 2.5 | 10(exact 9.6) | 20.8 | 10.4 |
The R6 Siege value is the same at any DPI as long as you keep your DPI unchanged — only cm/360 changes with DPI.
Setting it in R6 Siege
Controls → Mouse Sensitivity, horizontal and vertical (whole numbers 1–100).
Assumes the default MouseSensitivityMultiplierUnit of 0.02 in GameSettings.ini — most players never change it.
Check it in 30 seconds
- Put a ruler or tape measure next to your mouse pad, or mark a starting line.
- In R6 Siege, line your crosshair up with a sharp edge, like a door frame or a pole.
- Move the mouse slowly to the right until the crosshair comes back to the same edge, a full 360° turn.
- The distance your mouse travelled should match the cm/360° the converter shows. If it's off, check that mouse acceleration and Windows "Enhance pointer precision" are off, and that you're not aiming down sights.
Questions
How do I convert Apex sensitivity to R6 Siege?+
Multiply your Apex sensitivity by 3.8397 and keep the same DPI. For example, 1.5 in Apex is 6 in R6 Siege (34.6 cm/360 at 800 DPI).
Is Apex sensitivity the same as R6 Siege?+
No. R6 Siege turns less per mouse movement than Apex, so the same number would feel slower. Use the converter to get the matching value.
Where do I set my sensitivity in R6 Siege?+
Controls → Mouse Sensitivity, horizontal and vertical (whole numbers 1–100). Assumes the default MouseSensitivityMultiplierUnit of 0.02 in GameSettings.ini — most players never change it.
How accurate is this sensitivity converter?+
It matches your exact hand movement for a full 360° turn, which is the same method aim trainers like KovaaK's use. Every game's value is checked against more than one source, and games with an unclear formula are left out rather than guessed. You can confirm any result in 30 seconds with the 360° test on this page.
What is cm/360?+
It's how far you move your mouse to turn a full circle in game. When two games have the same cm/360, your aim feels the same in both, even though the sensitivity numbers are different.
Should I change my DPI when switching games?+
No need. Keep the same DPI and change only the in-game sensitivity. If you do change DPI, tick "I'm changing DPI too" and the converter adjusts for it.
Sens sorted. Now fix your recoil.
The AlphaGen R6 Siege recoil macro keeps your spray steady so your new sens actually lands. Instant delivery and a free trial.
More conversions
- Apex to CS2× 1
- Apex to Valorant× 0.3143
- Apex to Rust× 0.1956
- Apex to Overwatch 2× 3.3333
- Apex to CoD / Warzone× 3.3333
- Apex to Fortnite× 3.9604
- Apex to The Finals× 22
- Apex to Deadlock× 0.5
- CS2 to R6 Siege× 3.8397
- Valorant to R6 Siege× 12.2173
- Rust to R6 Siege× 19.635
- Overwatch 2 to R6 Siege× 1.1519
- CoD / Warzone to R6 Siege× 1.1519
- Fortnite to R6 Siege× 0.9695
- The Finals to R6 Siege× 0.1745
- Deadlock to R6 Siege× 7.6794